Call Us: (+8613806867071)
                                  Insulated Piercing Connector

                                  NU(IPC) SERIES INSULATION PIERCING CONNECTOR

                                  Item No.: 205
                                  Features:
                                  NU consists from two glass-fiber reinforced plastic parts, which are fited with two brass tinned teeth's, which are coated with UV-curing silica grease and the teeth are fitted with rubber insulation. This set is associated with the bolt.
                                  INQUIRY
                                  Description

                                  Advantage:

                                  1).NU(IPC) SERIES INSULATION PIERCING CONNECTOR had passed 6KV test under water for 1 Min.

                                  2).Designed for all weather applications and easy to install.

                                  3).Its self-seam frame is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.
                                   

                                  Instructions:

                                  Purpose of Insulation piercing connectors (NU) is to connect main and one, two tap conductor s ' of section, how is written on NU body. Type without letter B serves to connect isolated conductors, with letter B bare conductors.NU for one tap conductor is equipped with cable termination cap PCEC16/120, for two output wires-no cap.

                                  1).Adjust the connector nut to suitable location.

                                  2).Put the branch wire into the cap sheath fully.

                                  3).Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

                                  4).Turn the nut by hand, and fix the connector in suitable location.

                                  5).Screw the nut with the sleeve spanner.

                                  6).Screw the nut continually until the top part is cracked and dropped down.

                                                             

                                   

                                  Item No. Main wire section Branch wire section Bolt
                                  NU-1 10-95 1.5-10 1
                                  NU-2 16-95 4-35 1
                                  NU-3 50-150 6-35 1
                                  NU-4 16-95 16-95 1
                                  NU-5 35-150 35-150 1

                                   

                                   

                                  JBC SERIES INSULATION PIERCING CONNECTOR

                                  Features:
                                  1).It is featuring a unique insulation technique.
                                  2).Connections can be made live in minutes and suitable for aluminum or Copper, the body materials are UV-resistant.

                                   

                                  Advantages:

                                  1).Designed for all weather applications and easy to install.

                                  2).Special connecting tablet is adopted in our insulation piercing connector, which is applicable to joint of Cu(Al) and Cu(Al) or Cu and Al.

                                  3).The self-seam frame of JBC Series Insulation Piercing Connector is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.

                                  4).Saving investments: first, less installation space needed; second, saving cost of bridge and civil engineering; third, it does not require terminal boxes, distribution boxes when building.
                                   

                                  Instructions:

                                  Full range of ABC Insulation Piercing Connectors used to tap off low voltage XLPE insulated Aerial Bundled Cable (ABC).

                                  1).Adjust the connector nut to suitable location.

                                  2).Put the branch wire into the cap sheath fully.

                                  3).Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

                                  4).Turn the nut by hand, and fix the connector in suitable location.

                                  5).Screw the nut with the sleeve spanner.

                                  6).Screw the nut continually until the top part is cracked and dropped down.

                                   

                                  Item No. Main wire section Branch wire section Bolt
                                  JBC-0 25-70 6-35 1
                                  JBC-1 35-70 6-35 1
                                  JBC-2 35-150 35-150 1
                                  JBC-3 50-240 50-150 2
                                   

                                   

                                   

                                  CPB SERIES INSULATION PIERCING CONNECTOR

                                   Features:

                                  1)It is featuring a unique insulation technique.

                                  2)Connections can be made live in minutes and suitable for aluminum or Copper, the body materials are UV-resistant.
                                   

                                  Advantage:
                                  1).CPB Series Insulation Piercing Connector Pass 6kv test under water for 1min.

                                  2).As the branch anywhere in the cable.

                                  3).Simple installation, small contact resistance and low temperature rise of the clamp.

                                  4).Its self-seam frame is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.

                                  Item No. Main wire section Branch wire section Bolt
                                  CPB25-25 10-25 10-25 1
                                  CPB25-70 16-70 4-25 1
                                  CPB70-70 16-70 16-70 1
                                  CPB95-95 16-95 16-95 1

                                   

                                   

                                  CPC SERIES INSULATION PIERCING CONNECTOR


                                  Application: 
                                  The CPC insulation piercing connectors are applicable for all types of LV-ABC.

                                  Features:
                                  1. Had passed 6KV test under water for 1 Min.
                                  2. Simple installation, small contact resistance and low temperature rise of the clamp. The body materials are UV-resistant.
                                  3. Its self-seam frame is wet proof, water proof, and anti-corr osive, which can prolong the using life of insulated lead and connector.
                                  4. Standard: EN 50483-4, NFC 33-020, NFC 33-004

                                   

                                  Item No. Main wire section Branch wire section
                                  CPC-1 Al 25-95 Al 2.5-95
                                  CPC-2 35 2.5-35
                                  CPC-3 70 2X(6-35)

                                   

                                   

                                  TTD Insulation Piercing Connectors

                                  Features:
                                  1)TTD Insulation Piercing Connectors are featuring a unique insulation technique.

                                  2)Connections can be made live in minutes and suitable for aluminum or Copper, the body materials are UV-resistant.
                                   

                                  Advantages:

                                  1).Designed for all weather applications and easy to install.

                                  2).Special connecting tablet is adopted in our insulation piercing connector, which is applicable to joint of Cu(Al) and Cu(Al) or Cu and Al.

                                  3).Its self-seam frame is wet proof, water proof, and anti-corrosive, which can prolong the using life of insulated lead and connector.
                                   

                                  Instructions:

                                  TTD series insulation piercing connector is not only used to connect the (or separate) the self-supporting insulated wire, but also used to separate lighting circuit.

                                  1).Adjust the connector nut to suitable location.

                                  2).Put the branch wire into the cap sheath fully.

                                  3).Insert the main wire, if there are two lays of insulated lay in the main cable, should strip a certain length of the first insulated lay from inserted end.

                                  4).Turn the nut by hand, and fix the connector in suitable location.

                                  5).Screw the nut with the sleeve spanner.

                                  6).Screw the nut continually until the top part is cracked and dropped down

                                  Item No. Main wire section Branch wire section Bolt
                                  TTD-82F AL25-95 AL 2*(2.5-35) 1
                                  TTD-151F AL25-95 AL2.5-35 1
                                  TTD-201F AL35-95 AL25-95 1
                                  TTD-281F AL120-185 AL10-25 1
                                  TTD-301F AL35-95 AL25-95 2
                                  TTD-401F AL50-185 AL50-150 2
                                  TTD-451F AL120-185 AL70-185 2




                                  2D55 Overhead Fittings

                                  Application:
                                  1. The 2D55 insulation piercing connectors are applicable for all types of LV-ABC.
                                  2. Had passed 6KV test under water for 1 Min.

                                  Feature:
                                  1. Simple installation, small contact resistance and low temperaturerise of the clamp. The body materials are UV-resistant.
                                  2. Its self-seam frame is wet proof, water proof, and anti-corrosive,which can prolong the using life of insulated lead and connector.
                                  3. Standard: EN 50483-4, NFC 33-020, NFC 33-004

                                   

                                  Item No. Main wire section Branch wire section
                                  2D55 35-95 2×2.5-35

                                   

                                  Eletrical Ageing Test Report.pdf 

                                  6kv test report2.pdf
                                   

                                  Insulated piercing connector TTD insulation piercing connector  CPC series insulation piercing connector  CPB series insulation piercing connector  JBC series insulation piercing connector

                                   

                                  Review


                                  1/3
                                  X
                                  欧宝体育平台